| Description
SVV Selector valve has been designed to meet the demand of progressive machine manufacturers for versatile, cost effective, reliable circuit selector. The valve body is produced by cast iron EN-GJL300 alloy and it is machined using high precision, advanced, contemporary techniques. The advanced design of the valve spool ensures that fast spool switching can take place under any conditions without the use of a separate drain line.
Construction
SVV Selector valve stackable 6 port/2way change over valves are designed to be used when extra circuits are to be operated from one control lever on machines such as fork lift trucks, agricultural front end loader,telescopic handlers, and in transmission circuits. SVV can be stacked up to 3 valves allowing for the diverting of flow 2,3 or 4 directions depending on the combination chosen.
Mounting
The distributor is fixed with two bolts M8. SVV valve bank can be optionally equipped with a housing, containing relief valve, on the outlet end of the valve, protecting the motor or cylinder operated by the B ports against excessive pressure.
Technical information
| Ambient temperature |
-40…+95 C |
| Hydraulic fluid temperature |
-20…+70 C |
| Nominal flow |
90 l / min |
| Max. operating pressure |
280 bar |
| Viscosity |
10-400 mm2 / s |
| Filtration |
18/14 acc. to ISO 4406 |
| Supply voltage |
12, 24 V DC |
| Power |
65 W |
| Switching frequency 1/h |
15000 |
| Coil temperature |
Up to 180 C |
| Duty cycle |
% 100 |
| Spool leakage 100 bar and 25 mm2/s viscosity |
2 cm3 / min |
|
+373 22 026 266 
